Whether your cooling tower is large or small, it has chemical treatment requirements that must be met accurately and reliably to control corrosion, scale and deposits. Chemicals injected include:

• Corrosion inhibitors
• Scale inhibitors
• Dispersants
• Biological control agents
• Coagulants
• Flocculants

Until now, your choices in treatment systems were limited:
You could obtain an unreliable, minimum-capability system from your chemical supplier…
Or you could spend your design resources on a custom-built system.
Either way, it was hard to get the right combination of capability and cost.
We have Solution for above problems they are:

Aquablend 04 – Scale 
AQUABLEND- 04 is a liquid formulation designed protects ferrous as well as copper equipment from recirculating cooling water system. It contains no heavy metal formulation and powerful scale inhibitor to control precipitation of calcium phosphates, carbonate & sulphate. Along with a catalyst it also contains dispersant to keep suspended matter such as silt, metal oxides, etc in dispersed form avoiding deposition on heat exchangers  
 
Aquablend QAT – Biocide 
AQUABLEND-QAT is biodegradable ,wide spectrum organic liquid micro biocide based on quaternary ammonium compounds used in industrial recirculating cooling water systems. AQUABLEND-QAT controls build up of biological slimes & sulphate reducing bacteria  
 

CHILLING PLANT CHEMICAL 

The primary objective of cooling water treatment is to facilitates heat rejection & minimize water consumption. Cooling involves he transfer of heat (Btu's Kcal / Kg) from one substance to another. The substance that loses hest is said to be cooled, the one receives the heat is referred to as the coolant. Cooling water for the industries if untreated cause several problem i.e. corrosion, Scaling, fouling & Microbiological growth in Cooling Towers, & other parts, resulting in production loss, equipments failure & breakdowns.

 Aquablend-292 is a liquid blend of molybdate & nitrite base along with a pH buffer. The product is recommended for use in closed component Cooling system like Chillers & genset system. The product is also applicable to hood / jacket cooling in steel industry 

 COOLING TOWER CHEMICAL

Aquablend  04  - Scale 

AQUABLEND- 04 is a liquid formulation designed protects ferrous as well as copper equipment from recirculation cooling water. It contains no heavy metal formulation and powerful scale inhibitor to control precipitation of calcium phosphates, carbonate & sulphate. Along with a catalyst it also contains dispersant to keep suspended matter such as silt, metal oxides, etc in dispersed form avoiding deposition on heat exchangers 
 
Aquablend QAT - Biocide

AQUABLEND-QAT is biodegradable, wide spectrum organic liquid micro biocide based on quaternary ammonium compounds used in industrial recirculation of cooling water systems. AQUABLEND-QAT controls build up of biological slimes & sulphate reducing bacteria 
 
Aquablend PNT - Biocide 

AQUABLEND-PNT is a powerful anti foul ant for treatment of recirculation of cooling water. It is a wide spectrum liquid micro biocide for checking microbiological growth. AQUABLEND-PNT controls build up of trouble-some bacteria in industrial cooling water. a powerful dispersant keeps slit & similar foul ants in suspension.  

Aquablend CBT - Biocide 

AQUABLEND-CBT is a wide spectrum non-oxidizing liquid micro biocide based on carbamate compounds used in industrial recirculation of cooling water systems & air washers. AQUABLEND-CBT prevents growth of micro-organisms such as fungai,bacteria,including sulphate reducing bacteria. 

DESCALING CHEMICAL  

Descaling / chemical cleaning is more effective as the removal of inorganic foul ants from process lines, equipments, surface etc. Cleaning should be combination of three elements i.e. Solvents (acid, alkali, surface), Fluid velocity (Stirring, spraying, agitation, air rumbling & steam addition etc.) Heat (hot water or hot surface). Cleaning is divided into two categories: pre operational cleaning & routine maintenance cleaning.

AQUABLEND-DS is designed to remove the scaling& corrosion products from boiler& cooling water circuits , heat changers etc. It is a liquid formulation to remove hardness & low concentrated silica scales that can be removed offline by circulating its dilute solution of the chemical. It is a balance formulation of Hydrochloric Acid, Dispersant Wetting Agents & Corrosion Inhibitor. 

RO CHEMICALS

RO System if untreated cause several problems like inorganic, colloidal & bio fouling resulting in reduced permeate recovery, increased pressure differential & permeate conductivity, frequent membrane cleaning ultimately premature membrane failure. Scaling elements like carbonates, Sulphates, Silicates, iron, fluoride & aluminum are highly effective threshold agent inhibit precipitation of these salts by increasing their solubility limit. It is also acts as iron sequester thereby iron fouling.

AQUABLEND -902 (SILICA ANTISCLANT FOR R.O.)

AQUABLEND-902 is designed formulation of antisclant for the feed water with higher levels of silica & metal oxides. Use of aquablend-902 will ensure control of silica scales & fouling due to metal oxide. This will give longer performance of the machine. 

AQUABLEND -921 R.O. CLEANING CHEMICAL 

AQUABLEND-921 is designed formulation of cleaners for the effective removal of carbonates, metal oxide & sulfate scales of barium, strontium & calcium in reverse osmosis system. 

RESIN CLEANING CHEMICAL

 CATION RESIN CLEANING COMPOUND 

AQUABLEND-RCC IS AN ONLINE CATION RESIN CLEANING COMPOUND FOR PREVENTION OF ORGANIC FOULING & HEAVY METAL FOULING OF RESIN. IT IS A BLEND OF SEVERAL SURFACTANTS & IRON SOLUBULISING AGENT

Resin Cleaning Chemical - Cation (RCCC)       

Dosage (15 gram /ltr. Of resin once in a month) for Softner

(Std. Packing 20 Kg.Can)  

ANION RESIN CLEANING COMPOUND 

 AQUABLEND-RCA IS AN ONLINE ANION RESIN CLEANING COMPOUND FOR PREVENTION OF ORGANIC FOULING & BIOLOGICAL FOULING OF RESIN. IT IS A BLEND OF SEVERAL SURFACTANTS & BIOLOGICAL PREVENTIVE AGENT

 Resin Cleaning Chemical - Anion (RCCA)             

Dosage - 15 gm/ ltr. Of Resin in NaOH solution once in a Month.)

(Std. Pkg. 20 kg Can)  For DM Plant