Latest News
-
27-10-2021Read More
Ludhiana: Buddha Nullah rejuvenation project begins with release of 200 cusecs of fresh water
-
27-10-2021Read More
Policy to fill lakes in parched districts with treated sewage water from Bengaluru continues
-
27-10-2021Read More
Packaging firm Huhtamaki partners River Recycle and VTT to tackle floating river waste in India
-
27-10-2021Read More
Industrial pollution set to pose serious threat to Odisha's Bhitarkanika Wildlife Sanctuary
-
27-10-2021Read More
Grundfos Enters into Agreement to Acquire Leading Water Technology Company MECO
WATER SOFTENER
Raw water is termed “hard” when it contains dissolved salts of calcium & magnesium. Temporary, alkaline or carbonates of calcium & magnesium, Permanent, non – alkaline or non – carbonate hardness is caused by dissolved chlorides, sulphates or nitrates of calcium & magnesium, Softner remove hardness in water.
PROCESS
The softening process consists of passing raw water containing hardness through a bed of cation resin in sodium form. The hardness ions Ca & Mg are taken up by resin and in exchange sodium ions are relinquished from the resin . Raw water will continue to get softened till the resin gets exhausted. Bringing back the resin to it original form is called regeneration . Softener resin is regenerated by sodium chloride of 10—15 %Concentration.
Requirement for Designing Softener: Hardness of Water, Flow Rate/Hour, Single Charge Softening.
WE OFFER ALL RANG OF WATER SOFTNERS
SPECIFICATIONS FOR WATER SOFTNERS
Parameters
Numasoft-15
Numasoft-30
Numasoft-55
Numasoft-80
Numasoft-105
Numasoft-140
Resin Qty.
15 ltr.
30 ltr.
55 ltr.
80 ltr.
105 ltr.
140 ltr.
OBR @ 100 ppm Hardness
7.5 M 3
15 M 3
28 M 3
40 M 3
55M3
80M3
Min. Working Pr.
2.0 Kg / cm²
2.0 Kg / cm²
2.0 Kg / cm²
2.0 Kg / cm²
2.0 Kg / cm2
2.0 Kg / cm2
Max. Working Pr.
4.0 Kg / cm²
4.0 Kg / cm²
4.0 Kg / cm²
4.0 Kg / cm²
4.0 Kg / cm²
4.0 Kg / cm²
Size & Type of Valve
Top Mounted MPV 3/4”
Top Mounted MPV 3/4”
Top Mounted MPV 3/4”
Top Mounted MPV 3/4”
Top Mounted MPV 1½”
Top Mounted MPV 1½”
Regenrants Qty.
Na Cl / 2.5 Kg.
Na Cl / 5 Kg.
Na Cl / 8.5 Kg.
Na Cl / 12 Kg.
Na Cl / 15 Kg.
Na Cl / 20 Kg.
Resin
Thermax Make
Thermax Make
Thermax Make
Thermax Make
Thermax Make
Thermax Make
Vessel
FRP
FRP
FRP
FRP
FRP
FRP
Max. Flow Rate
2 M 3 / Hr.
2 M 3 / Hr.
2 M 3 / Hr.
2 M 3 / Hr.
3 M3 / Hr.
4 M3 / Hr.
Vessel Dia. & Height
205 x 645 mm
205 x 1120 mm
265 x 1245 mm
340 x 1175 mm.
400 x 1130
400 x 1470 mm
mm
Parameters
Numasoft-200
Numasoft-250
Numasoft
Numasoft-480
Numasoft-750
Numasoft-1000
-330
Resin Qty.
200 ltr.
250 ltr.
330ltr.
480 ltr.
750 ltr.
1000 ltr.
OBR @ 100 ppm Hardness
100 M 3
125 M 3
165 M 3
240 M 3
375M3
500M3
Min. Working Pr.
2.0 Kg / cm²
2.0 Kg / cm²
2.0 Kg / cm²
2.0 Kg / cm²
2.0 Kg / cm2
2.0 Kg / cm2
Max. Working Pr.
4.0 Kg / cm²
4.0 Kg / cm²
4.0 Kg / cm²
4.0 Kg / cm²
4.0 Kg / cm²
4.0 Kg / cm²
Size & Type of Valve
Top Mounted MPV 1½”
Side Mounted MPV 1½”
Side Mounted MPV 1½”
Side Mounted MPV 1½”
Side Mounted MPV 1½”
Side Mounted MPV 1½”
Regenrants Qty.
Na Cl / 25 Kg.
Na Cl / 30 Kg.
Na Cl / 40 Kg.
Na Cl / 60 Kg.
Na Cl / 90 Kg.
Na Cl / 120 Kg.
Resin
Thermax Make
Thermax Make
Thermax Make
Thermax Make
Thermax Make
Thermax Make
Vessel
FRP
FRP
FRP
FRP
FRP
FRP
Max. Flow Rate
3 M 3 / Hr.
3 M 3 / Hr.
4 M 3 / Hr.
4 M 3 / Hr.
5 M3 / Hr.
5 M3 / Hr.
Vessel Dia. & Height
16” x 65”
16” x 75”
20” x 69”
24” x 72”
30” x 72”
36” x 72”
Note. :- Inlet Water should be colorless free from turbidity, oil, grease, Organic Matter.
Treated water quality depends on Raw Water Analysis.
( FRP Vessels & MPV can also be used for Filter & DM Plants )